How to Configure M2M-7350 Gateway
Step-by-step tutorial for setting up and configuring the M2M-7350 Gateway device.
M2M-7350 Gateway Configuration Guide
This tutorial will guide you through the initial setup and configuration of the M2M-7350 Gateway device.
Prerequisites
M2M-7350 Gateway device
Power adapter (12V DC)
Ethernet cable
Computer with web browser
Step 1: Hardware Installation
Connect the power adapter to the gateway
Connect Ethernet cable from gateway to your network
Wait for the device to boot (LED will turn solid green)

Figure 2: M2M-7350 Gateway Connection Diagram
🎥 Video Tutorial
Watch this step-by-step video guide for M2M-7350 gateway configuration:
Step 2: Access Web Interface
Open your web browser and navigate to the default IP address:
http://192.168.1.100Default credentials:
Username:
adminPassword:
admin
Step 3: Basic Network Configuration
Navigate to Settings → Network
Configure network mode:
Static IP or DHCP
Subnet mask
Default gateway
Click Apply and restart the device
Step 4: Protocol Configuration
Configure the communication protocol for your devices:
Go to Settings → Protocols
Select protocol type (Modbus RTU, Modbus TCP, etc.)
Configure parameters:
Baud rate: 9600, 19200, or 38400
Parity: None, Even, or Odd
Stop bits: 1 or 2
Save configuration
Step 5: Verify Connection
Test the configuration:
Navigate to Dashboard
Check connection status
View real-time data from connected devices
Important: Always change the default password after first login for security purposes.
Download Complete Manual
For detailed configuration instructions, download the complete PDF manual:
