Monitor & Optimize Energy Usage in Real-Time
RTime Energy is an IoT-based energy monitoring solution that helps you understand consumption patterns, identify anomalies, and optimize operational efficiency across your entire facility.
* Based on typical energy optimization results from customer implementations
TRUSTED BY INDUSTRY LEADERS
Without Proper Monitoring, You're Flying Blind
Many organizations face critical challenges in energy management that directly impact their operational efficiency and bottom line.
Lack of Visibility
Without real-time monitoring, energy consumption remains a black box. Decisions are made based on assumptions rather than actual data, leading to inefficient resource allocation.
Rising Energy Costs
Energy bills continue to climb without clear insight into where waste occurs. Manual meter reading is time-consuming and prone to errors, making cost optimization challenging.
Delayed Anomaly Detection
Equipment malfunctions, leaks, and abnormal consumption patterns often go unnoticed until the monthly bill arrives—too late to prevent significant losses.
RTime Energy: Intelligent Energy Monitoring Made Simple
An IoT-based energy monitoring system that connects various digital meters to a unified platform. Monitor, analyze, and optimize your energy usage from anywhere, at any time.
Zero Programming Required
Simply configure the gateway settings—no coding or specialized software development needed
Multi-Protocol Support
Compatible with Modbus RTU/TCP, RS485, Pulse Input, Analog 4-20mA, and more
Flexible Visualization
Built-in Node-RED dashboard with option to integrate your preferred visualization platform
Real-Time Data Access
Instant access from any device on your network with live data synchronization
System Architecture
From Meters to Dashboard in 4 Simple Steps
A straightforward integration process that requires no programming—just configure and start monitoring immediately.
Connect Your Meters
Link your digital meters to the Conprosys IoT Gateway using the appropriate communication protocol.
- kWh meters for electricity
- Water flow meters
- Fuel consumption meters
- Gas meters and sensors
Configure the Gateway
Set up communication parameters through the intuitive configuration interface—no programming required.
- Select communication protocol
- Define polling intervals
- Set up data mapping
- Configure network settings
Data Transmission via MQTT
The gateway automatically transmits collected data to the RTime Energy server using the reliable MQTT protocol.
- Lightweight messaging protocol
- Reliable data delivery
- Low bandwidth consumption
- Secure encrypted transmission
Monitor & Analyze
Access your comprehensive dashboard from any device to view real-time data, historical trends, and actionable insights.
- Real-time consumption display
- Historical data analysis
- Customizable reports
- Alert notifications
Everything You Need for Complete Energy Visibility
Comprehensive features designed to give you full control over your energy consumption monitoring and optimization.
Real-Time Monitoring
Track energy consumption as it happens with second-by-second data updates. Make informed decisions based on current conditions, not yesterday's data.
Multi-Period Analytics
View and compare consumption data across multiple time frames—hourly, daily, weekly, monthly, and yearly. Identify patterns and seasonal trends with ease.
Smart Alert System
Receive instant notifications when consumption exceeds thresholds or anomalies are detected. Respond to issues before they become costly problems.
Historical Data Storage
Access complete historical records for in-depth analysis, compliance reporting, and audit requirements. Export data in multiple formats for external analysis.
Process-Level Tracking
Integrate with RTime OEE for granular monitoring of energy consumption per production process, machine, or specific slot number.
Customizable Dashboard
Build your perfect view with Node-RED's drag-and-drop interface, or connect to your existing visualization platform through our open APIs.
Works with Industry-Standard Protocols
The Conprosys IoT Gateway supports a wide range of industrial communication protocols, enabling integration with virtually any digital meter available in the market.
Zero Programming Required
Just configure parameters—meters connect instantly.
Modbus RTU
Serial Communication
Industry-standard protocol for connecting instruments and controllers via serial lines (RS232/RS485)
Modbus TCP
Ethernet Network
Modern TCP/IP based variant enabling Modbus communication over standard Ethernet networks
RS485
Industrial Standard
Robust multi-drop communication standard supporting long cable runs and multiple devices
Pulse Input
Digital Counter
Direct pulse counting from meters with pulse output, supporting various pulse rates and ratios
Analog 4-20mA
Current Loop
Standard industrial current loop signal for analog sensors and transmitters
0-10V DC
Voltage Signal
Direct voltage measurement input for sensors with 0-10V DC output signals
Compatible with Various Meter Types
Integrate all your digital meters into a single, unified monitoring platform.
kWh Meter
Electricity & Power
Water Meter
Water Consumption
Fuel Meter
Diesel & Fuel Oil
Gas Meter
LPG & Natural Gas
Environmental Sensors
Temperature & More
Tailored Solutions for Every Industry
See how different industries leverage RTime Energy to optimize their energy management and reduce operational costs.
Production Line Optimization
Monitor energy consumption per production line, machine, or shift. Identify energy-intensive processes and optimize scheduling for cost efficiency.
- Per-machine energy tracking
- Shift-based analysis
- Production efficiency correlation
Facility Management
Comprehensive monitoring of HVAC, lighting, and equipment across multiple floors or zones. Enable tenant billing based on actual consumption.
- Zone-based monitoring
- Tenant sub-metering
- HVAC optimization
Distribution Network Monitoring
Track energy flow across distribution networks, identify losses, and monitor critical infrastructure points in real-time.
- Network loss detection
- Critical point monitoring
- Demand forecasting
Measurable Results for Your Business
RTime Energy delivers tangible impact on operational efficiency and cost optimization.
Potential Cost Reduction
Organizations typically discover significant savings opportunities through visibility into consumption patterns and waste identification.*
Faster Issue Detection
Identify anomalies and equipment issues significantly faster compared to traditional monthly bill review cycles.
Complete Visibility
Gain full transparency into energy consumption across all monitored points, meters, and locations.
Continuous Operation
System operates around the clock, ensuring data is always available whenever you need to make decisions.
*Results may vary depending on facility type, existing efficiency measures, and implementation scope. Savings based on typical customer implementations and case studies.
Configure Your Energy Monitoring System
Customize your package based on the number of meters and deployment type. Get an instant price estimate.
RTime-MC
RTime-CNT = 1
IoT / M2M Controller
1 device for 10 meter
RTime-Energy
Industrial Computer
1 device for Server Application
Grand Total
Your Configuration:
Ready to Get Started?
Contact our team for a detailed quotation including installation, training, and support services.
Everything You Need to Know About RTime Energy
Common questions about implementation, technical capabilities, and getting started with energy monitoring.
- Electricity Meters: kWh meters with Modbus RTU/TCP, RS485, or pulse output
- Water Meters: Flow meters with 4-20mA, pulse, or Modbus interface
- Fuel Meters: Diesel and fuel oil meters with standard protocols
- Gas Meters: LPG and natural gas meters (Modbus, pulse, analog)
- Environmental Sensors: Temperature, humidity, pressure sensors (4-20mA, 0-10V)
- Custom Sensors: Any sensor with standard industrial output can be integrated
Still Have Questions?
Our technical team is here to help. Get in touch for detailed answers specific to your facility and requirements.
Choose Your Path to Energy Efficiency
Select the engagement option that fits your needs. All options include full support and expert guidance.
Energy Audit Consultation
1-hour consultation with our energy management specialists to assess your current consumption and identify savings opportunities.
- Current consumption analysis
- Waste identification review
- ROI estimation customized to your facility
- Implementation roadmap
Interactive System Demo
30-minute interactive demonstration with your actual use case. See how RTime Energy monitors, analyzes, and optimizes energy consumption.
- Live system walkthrough
- Real facility data examples
- Feature deep-dive for your industry
- Q&A with technical expert
Full System Trial
Deploy RTime Energy. Prove ROI with real data before full-scale implementation.
- Complete hardware & software deployment
- Installation & configuration included
- Team training & onboarding
- Performance measurement & ROI validation